Thursday, October 30, 2008

Continuing civilization from Harappa to Iron pillar

An interesting – yet a much needed analysis had been recently done

highlighting the similarity between Harappan and Gupta period artifacts,

thereby establishing the continuity of

the Harappan tradition till the times as late as a couple of millennia ago

from whence we have a recorded history.

It has been found in the research by Prof R. Balasubraminian

that the Iron Pilar at Delhi conforms to the measurement scales

used in the Harappan sites.

This means that there had been a continuity

of engineering tradition from the Harappan to the Ganga civilization.

Papers by Prof. R. Balasubramanian (October 2008) can be read at

http://sites.google.com/site/kalyan97/sarasvati-researches * On the continuity of engineering tradition from Harappa to Ganga civilization

http://www.scribd.com/doc/7544170/Man-Environment-2008-Harappa-Ganga

* On the mathematical significance of the dimensions of the Delhi iron pillar

http://www.scribd.com/doc/7544171/Currsci-25sep08-Mathematical-Significance

* Analysis of terracotta scale of Harappan civilization from Kalibangan http://www.scribd.com/doc/7544160/Curr-Sci-Kalibangan-Scale-10sep08

It has been found that the standard measure of amgulam (inch in Indian system)

used in making the artifacts in Harappan sites

and in the iron pillar is roughly equal to 17.5mm.

The basis of measurement used here seems to be

108 amgulam = 1 dhanus.

The height of the Iron pillar is exactly 4 dhanus of this pramana.

In this context, I wish to highlight some more issues that must be looked into,

because any further research on the other measurements

in the Harappan sites is likely to give rise to differences

in this scale of measurement.

The reason is that there had been different scales

depending on the things measured.

But the truth is that the system of measurement

as it existed until the advent of the British –

had been there for thousands of years –

for as long as civilization exited in Aryavarta

that spread in the south of Himalayas.

This system started with Vishwakarma (yesterday was Vishwakarma Day)

who devised this system for northern hemisphere. 

Northern hemisphere is associated with Devas.


The proof for this comes from Vishvakarma Prakashika.

Vishwakarma says that while 'paramanu'

(the atom that can been only with spiritual eye –

8 paramanu = 1 renu which is a spec of dust)

was the basic unit of measurement for the devas,

he would recommend

'Salivrihi' grain as the basis for measurement for humans.

The width of 8 salivrihi = 1 amgula (inch)

There are 5 types of Salivrihi (Sweta, maha, rakta, saugandita and hema)

of which 'rakta-Sali' has been followed by the architects

of later period of Vishwakarma.

This Sali vrihi is the grain of barley.


From Puranas and Uttara Ramayana by Valmiki

it is known that Vishwakarma once built the places in the Meru

the abode for Shiva.

When Shiva made Himalayas his abode,

Vishwakarma built His place at the Himalayas.

It was he who built the abode for Indra (Amaravathy)

He was asked by the demons (ancestors of Ravana)

to build the city of Lanka

in the style of Amaravathy!


Maya's name comes in the later part of Vishwakarma

or in the period of Mahabharatha.

Maya is associated with Tripura.

Many of his important books that were with us till the British came, were now lost.

It is said that many were taken away by the Germans

but many are still in the libraries of Nepal.


Coming to the main issue that I want to write in this post,

there had been different systems of measurement used for different purposes

and unless the researchers take cognizance of this and

seek guidance from Sthapathis (sculptors trained in shilpa sastra),

confusion will prevail,

hampering the efforts to connect not only the Harappan but

the far olden archaeological findings

which can be detected in Bet Dwaraka,

Poompuhar and Kumari.

The entire sub-continent used the same Hindu system of measurement.

What was used in Chidambaram temple will be the same as

what was used in any findings related to Shiva (Pasupathy) in the Harappan sites.

But what is used for Vishnu related sculptures is distinct

from what is used in Shiva related sculptures.


For instance the Iron pillar at Delhi has a height of 4 dhanus

-each dhanus measuring 108 times the amgula used for 'pillars' dedicated to Vishnu.

Vishnu has 4 hands and 108 is the sacred number for Vishnu.

Likewise, the measurement differed basically on three categories

for all types of constructions and manufacturing

and deity-related constructions too had some basic differences

on the basis of factors that distinct for respective deities.

Any analysis of artifacts or even lay-outs in archaeological sites

must take this into consideration so that right perspectives are gained.


For instance in the case of erecting pillars such as the one at Delhi

(Vishnupadam is the name of the place

where the iron pillar is raised as a symbol of victory),

the measurement used must have been 'mAtrasaya'

of the amgula of 6 (not 8) barley grains.

This amgula measurement is used in

making weapons like bows,

furniture like cots and couches,

stables for elephants, horses,

dancing stages,

ploughs and other agricultural appliances,

stahmbhas (pillars) and yupastahmbhas in yaga shala,

ships, flags, umbrellas

and such other instruments and tools of everyday use.


The 'madhyama' measurement of 7 barley width

was used in measuring

drenches, moats, watersheds,

sub-tarraean water reservoirs,

store houses of armory,

rock-cut temples and trenches.


The 'prAsaya' measurement of 8 barley grains

was used in buildings, houses, palaces,

temples, doors, gardens, forests,

chariots, streets etc.


So the researcher must employ the proper 'mAna'

depending on the article of site he is measuring.


Regarding distances, there had been different types once again.

The popular form of measurement of distances was 'yojana'.

We find different measurements for yojana in

Mayamata and Vishwakarma prakashika.

While Maya says that one yojana is equal to 32,000 hastas

(1 hasta /muzham = 24 amgulas), 

Vishvakarma says that one yojana is equal to 16,000 hastas.


From the huge disparity, we can guess

that each of them meant the yojana for a separate purpose.

One interesting observation is that

the application of the system that was prior to the advent of the British in India

exactly fits in measuring the distance between India and Srilanka

as told in Valmiki Ramayana.

The system in vogue prior to the British is this.

24 amgula = 1 muzham (hasta)

4 muzham = dhanus

2 dhanus = 1 danda

50 danda = 1 koopidu

4 kooppidu = 1 yojana.

Or the distance at which a call can be heard.

From valmiki Ramayan we know that Hanuman traveled for 100 yojanas

for crossing the sea.

That is, the Nala-Setu was built for 100 yojanas.

(Nala belonged to Vishwakarma lineage)

The sound travels a distance of 300 metres = 1 yojana

For 100 yojanas 300 x 100 = 30,000 mt = 30 km

This is the distance of Ram- setu!

The same yojana is calculated differently if it is about the time!

1 yojana = 1 kaadam which is meant in terms of time = 7-1/2 ghatis.

1ghati = 24 minutes.

7-1/2 ghatis = 180 minutes = 3 hours.

But this measurement is used only for time- based distances.

This is not applicable in measurement of distances.

It is therefore necessary to know the scales and

their exact applications.

Without knowing them,

it is not advisable to measure the sites and artifacts

of archaeological importance.


Related articles:-

http://jayasreesaranathan.blogspot.com/2008/08/indian-culture-in-arabia-in-pre-islamic.html

http://jayasreesaranathan.blogspot.com/2008/08/5-reasons-why-world-will-not-end-on.html

No comments:

Post a Comment